The Ernie Ball volume pedal is one of the most used pedals out there, but surprisingly it has BIG issues. We exposed this in our Volume Pedal Woes (Active/No Loss Mod) article and have developed a mod that cures all the issues making this volume an awesome tool for more than just swells!
We install our Buffered Splitter circuit to give you two truly isolated outputs for tuner and mono out. This eliminates ALL of the noise, tone loss, and removes the improper load on your signal. For those of you who want to use the tuner out function, this is a must have fix. The biggest benefit of this mod is that it makes your EB Volume active and buffered with our buffer circuitry. This will give you the best clean tone you may have ever had because it will drive your long path to your amp. The pedal in its stock condition is drastically hurting your tone (even when you're not using the tuner out).
Because we install our active buffered circuitry, you will now need to power the unit. Also, due to some mechanics, the stock Ernie Ball Taper switch will be removed during this Mod. As far as powering your modded pedal, use any standard 9v DC Negative power supply and your good to go! This pedal consumes less than 100mA.
ERNIE BALL REPAIRS
In addition to our Mod, we do offer the basic string/spring and/or potentiometer replacement for those EB's where the string has broken. If you're string has not broken and your VP overall mechanically functions OK, then you do not need to add this option to your cart. If your string has broken or if your pot is scratchy... please add this option to your cart and we will take care of the string/pot replacement at the same time as we take care of the Mod.
© 2015 JHS Pedals
711 Main Street
Grandview, MO 64030